No

Ref

Paper title

Authors

Country of the

corresponding author

PSA1-1

141

A Permanent Magnet Generator for Small Scale Wind Turbines

J.R. Bumby, N. Stannard and R. Martin

UK

PSA1-2

313

A Method for Dynamic Analysis of an Interior Permanent Magnet Motor Based on Nonlinear Magnetic Circuit

K. Nakamura, M. Ishihara, and          O. Ichinokura

Japan

PSA1-3

163

High-speed permanent magnet generators design and testing

Yanush Danilevich, Victor Antipov

Russia

PSA1-4

180

An Attempt to Extend the Flux Weakening Range of a Single Stator Dual Rotor PM Machine

 Imen Abdennadher, Ahmed Masmoudi and Ahmed Elantably

Tunisia

PSA1-5

234

Numerical design of  DC brush motor with rare-earth magnets  for ABS system including tolerances of input parameters

G. Ombach, J. Junak and A. Ackva

Germany

PSA1-6

244

A Stator Turn Fault Tolerant Strategy for Interior PM Synchronous Motor Drives  in Safety Critical Applications

Youngkook Lee and T.G. Habetler

USA

PSA1-7

245

Comparative Evaluation of Axial Flux versus Radial Flux Permanent Magnet Synchronous Machines

M. Krishnamurthy, B. Fahimi and K. D. Oglesby

USA

PSA1-8

249

Design and Implementation of a Tubular Brushless DC Motor for Direct-Drive Applications

S.H. Mao, B.J. Lin, and M.C. Tsai

Taiwan

PSA1-9

250

Design of Interior Permanent Magnet Motors for Smoothening Back-EMF Waveform

H.S. Chen and M.C. Tsai

Taiwan

PSA1-10

251

Development of the Discontinuous Primary Permanent Magnet Linear Synchronous Motor

Kenji Suzuki, Yong-Jae Kim, Masaya Watada and Hideo Dohmeki

Japan

PSA1-11

254

Optimised design of concentrated winding PM brushless motors

A. Castagnini, P. Faure Ragani, G. Secondo

Italy

PSA1-12

266

Evaluation of Eddy Current Loss in Tubular Permanent Magnet Motors by Three-Dimensional Finite Element Analysis

J. Chai, J. Wang and D. Howe

UK

PSA1-13

267

Magnetic Field Distribution in Brushless Permanent Magnet AC Motors with Interior Permanent Magnets (IPM) and Slotted Stator

F. Poltschak, W.Amrhein

Austria

PSA1-14

274

A Brushless Permanent Magnet Motor with Hybrid Windings

M. C. Tsai and L. Y. Hsu

Taiwan

PSA1-15

276

Torque ripple reduction design of Multi-layer Interior Permanent Magnet Synchronour Motor by using Response Surface Methodology

Liang Fang, Soon-O Kwon, Peng Zhang, Jung-Pyo Hong

China

PSA1-16

311

Reluctance Network Analysis Model of a Permanent Magnet Generator Considering an Overhang Structure

K. Nakamura, M. Ishihara, and O. Ichinokura

Japan

PSA1-17

312

Multipolar Reluctance Generator Using Stator Core with Permanent Magnet

O. Ichinokura, T. Ono, T. Tashiro, K. Nakamura, and A. Takahashi

Japan

Distribution, coil-span and winding factors for AFPM with concentrated windings

S. E. Skaar, Ø. Krøvel, R. Nilssen

PSA1-20

284

Application of a Toroidal Harmonic Expansion for Computing the Magnetic Field from a Balanced 6-Pole Permanent-Magnet Motor

J. Selvaggi, S. Salon, O. Kwon, and M.V.K. Chari

USA

No

Ref

Paper title

Authors

Country of the

corresponding author

PSA2-1

135

New Approach to Identification of Turbogenerator Rotor Quantities

G. Rogozin, N. Pjatlina

Ukraine

PSA2-2

188

About Currents from the Damping Winding Bars of Three-phase Synchronous Generator Connected on Rectifier

C. Nica, S. Enache, M. A. Enache

Romania

PSA2-3

213

Time-stepping FEM Based Modeling of a Synchronous Generator connected to infinite bus via a Delta-star Transformer

Luo Ying-li, Zhang Xinli Meng Liang

China

PSA2-4

214

The Analysis and Validation of Saturation Curve Series of Synchronous Generators

Zhang Xinli, Luo Yingli, Liu Xiaofang

China

PSA2-5

217

Half-order modelling of turboalternators - An adapted method of parameter identification

S. Racewicz, D. Riu, N. Retiere, P. Chrzan

Poland

PSA2-6

221

Computation of Forces and Stresses in the Winding Overhang of Large Hydrogenerators at Faulty Conditions

Georg Traxler-Samek, Axel Fuerst, Alexander Schwery and Carlos Ramirez

Switzerland

PSA2-7

229

On the Identification of the Synchronous Machine Parameters Using Standstill DC Decay Test

L. Vicol, M. Tu Xuan, J.-J. Simond, R. Wetter, I.A. Viorel

Switzerland

PSA2-8

233

A Comprehensive Algorithm for the estimation of Synchronous Generator Parameters

Elias Kyriakides

Cyprus

PSA2-9

247

Damping Shaft Torsional Oscillation of Synchronous Generator by Fuzzy Logic-Controlled SMES

Mohd. Hasan Ali, Toshiaki Murata, and Junji Tamura

Japan

PSA2-11

293

Special consideration in On-line Partial Discharge (PD) Monitoring for Stator Insulation Condition Assessment of Large Steam-Turbo Generators

E. Sharifi, S. Amini, K. Rahmani

Iran

PSA2-12

294

Stochastic Evaluation of Turbine-Generator Shaft Torsional Torques in a Six-Phase Power System

S.O. Faried and S. Aboreshaid

Canada

PSA2-13

329

Design of A Steam-resistant Insulation System for the Stator of A Low-voltage  Turbo-Generator

V. Sihvo, J. Pyrhönen

Finland

PSA2-14

338

Numerical Modelling of Large Solid Pole Synchronous Motors

Ling Luo, Chunting Mi, Haran Karmaker, Peter Zong and George Gao

USA

PSA2-15

372

A Method of Eddy Current Calculation for Stator Core Ends of Turbine Generators

Katsumi Yamazaki, Yuta Watanabe, Hisashi Mogi,Yoichi Mishima, Chikara Kaido, Shinichi Kanao,
Kazuhiko Takahashi, Kazumasa Ide, Ken’ichi Hattori, Akihito Nakahara and Takashi Watanabe

Japan

PSA2-16

383

The Nonlinear Characteristics of Turbo-generator under Abnormal Operating Conditions

Kang Jinping, Luo Yingli, Wang Jing, Liu Xiaofang, MengLiang

China

PSA2-17

408

 Pulsating torques during starting of synchronous motors: Implementation and comparative analysis of different measurement methods

Christer Danielsson, Holger Persson

Sweden

PSA2-18

437

On the Design of a Remote Intelligent Excitation Controller for a Synchronous Generator

Yannis L. Karnavas, Nicolaos P. Polyzos, Demetrios P. Papadopoulos

Greece

PSA2-19

486

The influence of magnetic saturation towards the induced voltage for homopolar synchronous generator

Sorin Deaconu, Lucian Tutelea,  Gabriel N. Popa,  Iosif Popa

Romania

PSA2-20

492

Analysis of Unbalanced Magnetic Pull in Train-Lighting Brushless Alternators with Skewed Rotor under Static Eccentricity and Conical Rotor Motion

K.P.P. Pillai, Achuthsankar S. Nair, G.R. Bindu

India

PSA2-21

497

Rotor monitoring tool for turbogenerators

E. Guillot

France

PSA2-22

498

Permeance network method coupling with experimental design in order to optimize turbo-alternators

Dmitry Petrichenko, Michel Hecquet, Pascal Brochet, Vyacheslav Kuznetsov, Daniel Laloy

France

PSA2-23

508

Line-Switching Test Based Practical Approach for Identification of Synchronous Machine Parameters

R. Wamkeue, J. Christian, I. Kamwa

Canada

PSA2-24

436

Behavior of Syncronous Generators with Rotor Excentricity Evaluated by the Polarization Fixed Point Method

I.R.Ciric, F.Hantila, M.Maricaru, and S.Marinescu

Romania

PSA2-25

604

Limits of turbine generator’s underexcited operation

Z. Maljkovic, I. Gašparac, M. Pavlica

Croatia

PSA2-26

639

Surface currents in solid poles of large synchronous machines at direct start

Yujing Liu, Holger Persson

Sweden

PSA2-27

685

Magnetic Unbalance in a Hydrogenerator's rotor and its effects on the Synchronous machine

A. Millan, A. Romero

Venezuela

PSA2-28

687

Steady-State Performance of a Hybrid Excitation Single-Phase Synchronous Generator

Nobuyuki Naoe, Tadashi Fukami, Akiyuki Minamide, Kazuya Takemata

Japan

PSA2-29

691

A BAS application of a Series Magnetized Synchronous Machine

D. Hagstedt, M. Alakula, T. Bergh

Sweden

No

Ref

Paper title

Authors

Country of the

corresponding author

PSA3-1

584

Radial forces and torque ripples in split-phase induction motors

Lieven Vandevelde, Claus B. Rasmussen and Jan A. A. Melkebeek

Belgium

PSA3-2

119

A Complete Induction Motor Model for Low and High Frequency Analysis

A. Boglietti, A. Cavagnino

Italy

PSA3-3

202

A New Posibility for the Determination of the Induction Machines Parameters

S. Enache, A. Campeanu, I. Vlad, M. A. Enache

Romania

PSA3-4

203

Influence of Magnetic Saturation on Induction Motor Model Selection

Marko Hinkkanen, Anna-Kaisa Repo, Jorma Luomi

Finland

PSA3-5

246

A Comparison of 3D Models for Determining Skin Effect in Induction Motor End Rings

C. del Perugia, R.D. Findlay, N. Stranges

Canada

PSA3-6

252

The Comparison Study of Different Models Used for Calculation of the Transient Processes of an Induction Motor During Frequency and Soft Starting

Maria Dems, Krzysztof Komeza

Poland

PSA3-7

269

Energy Efficiency of small Induction Machines:  Comparison between Motor and Generator Mode

Wim Deprez, Annick Dexters, Johan Driesen, Ronnie Belmans

Belgium

PSA3-8

279

Electromagnetic Excitation Forces in Small Induction Motors

Y. Yoshikuwa, A. Imagi, H. Kometani and J. Okada

Japan

PSA3-9

289

Analysis of Induction Motor Static Eccentricity using Time Stepping Finite Element

M.B.B. Sharifian, J. Faiz, B.M. Ebrahimi

Iran

PSA3-10

298

Using Improved Winding Function Theory and 2D Finite Element Method to Model Air-Gap Eccentricity in Induction Motors

E. Khosrowshahli, E. Sharifi Ghazvini, S. Shamloo

Iran

PSA3-11

326

Detailed Transient Analysis of Self Excited Induction Generator Feeding Induction Motor

Mehmet Akbaba, Amin M. Sultan,  Ebrahim Al-Gallaf

Bahrain

PSA3-12

358

Die-cast Copper Rotor Motors via Simple Substitution and Motor Redesign for Copper

R. Kimmich, M. Doppelbauer, D.T. Peters,  J.G. Cowie, E.F. Brush

Germany

PSA3-13

365

The complete electrical supply characterization of an induction motor that operates under a given NEMA unbalance

L. F. Mantilla, M. A. Rodríguez

Spain

PSA3-14

384

The Influence of Stochastic Properties on the Motor Parameters of an Induction Machine

C. Bastiaensen, W. Deprez, S. Stevens, J. Driesen

Belgium

PSA3-15

390

Optimization-Based Steady State Analysis of Parallel-Operated Three Phase Induction Generators and Motors

A. I. Alolah and M. A. Alkanhal

Saudi Arabia

PSA3-16

391

Steady-State Analysis of a Mixed Faults Three-phase Squirrel-cage Induction Motor using Time Stepping Finite Element Method

B.M. Ebrahimi, J. Faiz and M.B.B. Sharifian

Iran

PSA3-17

393

FE Torque Analysis of a Shaded-Pole Motor

L. Petkovska, G. Cvetkovski, V. Sarac

FYROM

PSA3-18

453

Stator-Tooth Optimization of an Induction Machine with Squirrel-Cage Rotor

C. Schlensok, S. Felgentrager, D. van Riesen, K. Hameyer

Germany

PSA3-19

458

Behaviour Analysis of Induction Machine Under Broken Bars and Distorted Voltage Input

J. Kappatou, A. Safacas

Greece

PSA3-20

463

Insulation Aging in AC motors due to mechanical stresses

J-Ph. Lecointe, S. Duchesne, R. Romary, J-F. Brudny, P. Schlupp

France

PSA3-22

196

The influence of the frame and windings on the natural frequencies of stator of
induction motors

S. L. Nau, B. C. Bork, H. L. V. dos Santos, N. Sadowski, R. Carlson

Brazil

PSA3-23

140

A solid rotor induction machine for turbo-assist operation

J.R. Bumby, E Spooner and M. Jagiela

UK

No

Ref

Paper title

Authors

Country of the

corresponding author

PSA4-1

130

Revisiting the MMF Analysis of Asymmetrical Two-Phase Induction Motors

L. M. de Castro Neto, J. R. Camacho, H. R. de Azevedo, S. C. Guimaraes, C. H. Salerno

Brazil

PSA4-2

169

A New Hybrid Brushless dc Motor without Permanent Magnet

E. Afjei, M.A. Saati, M.M. Nezamabadi, S.Ataei

Iran

PSA4-3

175

Modeling Techniques for Hybrid Excited Doubly Salient Motor with Rotor Skewing

Xiaoyong Zhu, Ming Cheng, Wenguang Li and Wei hua

China

PSA4-4

191

A New Claw Pole Synchronous Machine with DC Excitation in the Stator:a Comparison with the Conventional Claw Pole Alternator

H. Aloui, A. Masmoudi, M. Lecrivain and M. Gabsi

Tunisia

PSA4-5

193

Magnetic Anisotropy considered for Synchronous Claw-Pole Alternators  with Axial Flux Component

S. Schulte, F. Henrotte, K. Hameyer

Germany

PSA4-6

207

Model to Evaluate the Influence of the Winding Data on the Brush Wear in Universal Motors

A. Di Gerlando, R. Perini

Italy

PSA4-7

211

Performance of a Dual-Winding Reluctance Generator  With Multiple-Barrier Rotor

Tadashi Fukami, Masatoshi Momiyama, Kazuo Shima, Ryoichi Hanaoka, and Shinzo Takata

Japan

PSA4-8

264

Electrostatic Hysteresis Motor

M. Crivii and M. Jufer

Switzerland

PSA4-9

361

Some types of unconventional electromechanical energy converters: application and classification

I. Shvedchikova

Ukraine

PSA4-10

404

2D-FEM Modeling of an Axial-Flux Solid-Rotor Induction Motor

M. Valtonen, A. Parviainen and J. Pyrhönen,

Finland

PSA4-11

412

Clawpole Transverse-Flux Machine with Hybrid Stator

M. R. Dubois, N. Dehlinger, H. Polinder, D. Massicotte

Canada

PSA4-12

421

Light Structures for Low-Speed Multi-Pole Machines for Direct-Drive Applications

P.J.Tavner, E. Spooner

UK

PSA4-13

439

Rotor Design and Performance for a BDFM

P J Tavner, R A McMahon, P Roberts, E Abdi-Jalebi, X Wang, M Jagieła , T Chick

UK

PSA4-14

531

Limits and Advantages of Scaling as a Fast Procedure for Designing Transverse Flux Motors

Kang D H, Chang J H, Viorel I -A, Viorel Alina Cristina, Strete Larisa

Korea

PSA4-15

578

Developement of Tubular Type Linear Generator for Free-Piston Engine

Jaewon Lim, Ho-Yong Choi, Sun-Ki Hong, Dong-Hyeok Cho and Hyun-Kyo Jung

Korea

PSA4-16

581

Brushless DC Motor with Frequency Generator Substituted for Position Sensor

 Hiro Takano, Mikihiro Kishio, Hideaki Nanko

Japan

PSA4-17

589

Comparative Study on the equivalent circuit of the electric motor and traveling wave piezoelectric ultrasonic motor

Mircea Ignat, George Zarnescu

Romania

PSA4-18

606

High torque motor (vernier reluctance magnet machine) for specific systems

Ph. Enrici, J. Jac, N. Ziegler, D. Matt

France

PSA4-19

647

Performance Comparison of Three and Four-Phase Linear Tubular Stepping Motors

W. Missaoui, L. El Amraoui Ouni, F. Gillon, M. Benrejeb, P. Brochet

France

No

Ref

Paper title

Authors

Country of the

corresponding author

PSA5-1

348

Development of Synchronous Alternator with HTSC Armature

E.N. Andreev, L.I. Chubraeva, M.V. Manzuk, M.Yu. Platonova, S.S. Timofeyev

Russia

PSA5-2

347

Development of Three-Phase Transformer with HTSC Windings and Amorphous Alloy Cores

E.N. Andreev, L.I. Chubraeva, D.A. Korotkov, M.Yu. Platonova, D.A. Volkov

Russia

PSA5-3

544

Introducing complex engineering approach into curricula by superconductivity

I. Vajda, L. Farkas, S. C. Kashyap, D. K. Pandya

Hungary

PSA5-4

610

Design of permanent motors/generators for energy storage flywheels with Superconducting magnetic bearings

Z.Kohari

Hungary

PSA5-5

633

Nondestructive evaluation of electrical machines using superconductor windings

Raimond Grimberg, Adriana Savin, Rozina Steigmann, Sorin Leitoiu, Alina Bruma

Romania

PSA5-6

744

HTS HIA Generator and Motor for Marine Applications

K. Sivasubramaniam, E.T. Laskaris, M. R. Shah, J. W. Bray, N. R. Garrigan

USA

No

Ref

Paper title

Authors

Country of the

corresponding author

OSA1-1

235

Electromagnetic Design Analysis of Tooth Coil,  Voltage Regulated, PM Synchronous Generators

A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini

Italy

OSA1-2

156

Maximum Efficiency Operation of Interior Permanent Magnet  Synchronous Generator Based on State Space Model

Toshiaki Murata, Kazuhito Nakamura, Junji Tamura and Takeshi Tsuchiya

Japan

OSA1-3

352

Analysis of a High Pole Number Motor with Assymetries Using a Reduced Model

S. J. Salon, O-Mun Kwon, M.V.K. Chari

USA

OSA1-4

426

Unbalanced Magnetic Pull in High-Speed Brushless Permanent Magnet Motors – Experimental Observations and Results

U.M. Hoefer, A.G. Jack, B.C. Mecrow

UK

OSA1-5

457

Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings

C. Deak, A. Binder, and K. Magyari

Germany

No

Ref

Paper title

Authors

Country of the

corresponding author

OSA2-1

216

Study on Frequency Characteristics of Synchronous Generator Damper Circuit

M.Kakiuchi, T.Otaka, S.Nagano, T.Tokumasu, M.Fujita, K.Nagakura, J. Shiina, H.Ito, H.Shimada, D. Hiramatsu, K. Nagasaka

Japan

OSA2-2

287

Connection to Weak Electrical Supply Network of Two Synchronous Machines Operating in Recovery Regime

A. Campeanu, Mihai Radulescu, Marian Badica, Razvan Prejbeanu

Romania

OSA2-3

343

Development of High-Temperature Superconducting Electrical Machines at Siemens AG

Gunar Klaus, Wolfgang Nick, Heinz-Werner Neumüller, Georg Nerowski and William McCown

Germany

OSA2-4

413

Effect of Voltage Swells on the Transient Performance of Saturated Synchronous Motors

Ahmed M. El-Serafi, Narayan C. Kar

Canada

OSA2-5

562

Simplified 3D-effects modeling for low L/D Aspect Synchronous Motors

Di Wu, Haran Karmaker, Peter Zhong, Colin Sun, Hengfeng Chen

USA

No

Ref

Paper title

Authors

Country of the

corresponding author

OSA3-1

345

The Effect of Practical Operating Conditions on the Performance of Induction Machines

Wim Deprez, Cindy Bastiaensen, Stijn Stevens, Ronnie Belmans

Belgium

OSA3-2

367

Cast Copper Induction Motor Inter-bar Resistance Measurements

S. Englebretson, J.L. Kirtley Jr., K. Molina

USA

OSA3-3

518

Induction Machine Analysis for the Diagnosis of Rotor Faults Using the Leakage Magnetic Field

J. Kappatou, C. Marchand, A. Razek

Greece

OSA3-4

614

Estimating circuit models for a deep-bar Induction Motor using the harmonic finite element analysis

A.-K. Repo, A. Niemenmaa, A. Arkkio

Finland

OSA3-5

206

DTC vs. FOC for an induction machine-based flywheel energy storage system associated to a variable-speed wind generator – Experimental results 

Gabriel Cimuca, Stefan Breban, Mircea M. Radulescu,Christophe Saudemont, Benoît Robyns

Romania

No

Ref

Paper title

Authors

Country of the

corresponding author

OSA4-1

110

Estimation of the Boundaries for the Claw-pole Geometry in Electrical Water Pump Applications

H. Hembach, D. Gerling, S. Beyer

Germany

OSA4-2

731

An Innovative Axial-Flux Multi-Stack Homopolar SRM

P. Bolognesi, O. Bruno, L. Taponecco

Italy

OSA4-3

323

Numerical Modeling of 3-D Comb Drive Electrostatic Accelerometers Structure - Field And Mechanical Models

S. Wiak, K. Smółka

Poland

OSA4-4

434

Soft Magnetic Composite Axial flux seven-phase machine

F. Locment, E.Semail and F. Piriou

France

OSA4-5

535

Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments

Su jin Jeon, Sun bum Kwon, and Jung ho Lee

Korea

No

Ref

Paper title

Authors

Country of the

corresponding author

PMM1-1

340

Effect of Back-EMF Constraints on Fractional-Slot Surface PM Machines Designed for Wide Constant-Power Speed Range Operation

Ayman M. EL-Refaie, Thomas M. Jahns, John W. McKeever

USA

PMM1-2

351

Torque ripple improvement with IPMSM rotor shape modification

S. Vivier, V. Lanfranchi, G. Friedrich

France

PMM1-3

353

A Backstepping Controller for Sensorless Speed Control of DC Servo Motor Using Adaptive Backstepping Observer

A. Farrokh Payam,  B. Mirzaeian Dehkordi

Iran

PMM1-4

363

Torque ripple and cogging torque of surface mounted PM machines with concentrated windings

P. Salminen, H. Jussila, M. Niemelä and J. Pyrhönen

Finland

PMM1-5

368

Harmonic Current Injection Approach To Cogging Torque Suppression In Axial Flux PM Synchronous Machines

J.A. Tapia, D. Soto, A. Valenzuela, R. Wallace

Chili

PMM1-6

369

Experimental Validation of an Axial Flux PM Machine with Field Weakening Capability

J. A. Tapia, D. Gonzalez, R. R. Wallace, M. A. Valenzuela

Chili

PMM1-7

382

An analytical equation for cogging torque calculation in surface mounted permanent magnet motors

K. Y. Lu, P. O. Rasmussen, E. Ritchie

Denmark

PMM1-8

398

Toward Accurate Torque Calculation in Brushless Permanent Magnet and Reluctance Motors

John Simkin, Christopher P. Riley, and Alexandros M. Michaelides

UK

PMM1-9

406

Iron Loss Calculation in a Reciprocating Tubular Permanent Magnet Motor with Soft Magnetic Composite

T. Ibrahim, J. Wang, and D. Howe

UK

PMM1-10

444

Determination of d and q reactances of permanent-magnet synchronous motors using FEM

J. A. Güemes, A. M. Iraolagoitia and P. Fernández

Spain

PMM1-11

455

Design parameters for directly network connected non-salient permanent magnet synchronous generator

J. Kinnunen, J. Pyrhφnen, O. Liukkonen, P. Kurronen

Finland

PMM1-12

456

Disk Built-in DC Motor With High Coercive Nd-Fe-B Magnets

 M. Zagirnyak, P. Belyi, D. Miljavec

Ukraine

PMM1-13

477

Analytical vs. Numerical calculation of magnetic circuits of PM Machines at no-load and load

A. Rastogi, A. Binder

Germany

PMM1-14

566

Optimization Elements of the PM Excited Transverse Flux Linear Motors

D. H. Kang, P. Curiac and J.H. Chang

Korea

PMM1-15

509

Experimental Tests on a 9-phase Direct Drive PM Axial-Flux Synchronous Generator

D. Vizireanu, X. Kestelyn, S.Brisset, P. Brochet, E.Semail

France

PMM1-16

529

Comparison of non-salient pole permanent magnet motors structures for traction application

J. Figueroa, L.Radaorozandry, J.Cros, P. Viarouge

Canada

PMM1-17

545

Modeling and controlling attractive forces in permanent magnet machines

M. Scuotto, H. Polinder, M. Huizer

Netherlands

PMM1-18

551

Cogging torque elimination in permanent magnet machines

Bernard Laporte

France

No

Ref

Paper title

Authors

Country of the

corresponding author

PMM2-1

120

Induction Motor Control using Predictive Algorithm

E.S. de Santana, E. Bim and W.C. do Amaral

Brazil

PMM2-2

133

Closed-Form Analytical Investigation of  Electromagnetic Torque-Ripple Components in Induction Motor Drive Fed from PWM VSI with DC-Link Voltage Pulsation

J. Klima

Czech Republic

PMM2-3

172

Robust Sensorless Operation of Vector Controlled AC motors using Extended Kalman Filter trained neural networks

Vedam Subrahmanyam

India

PMM2-4

189

Control Limits of Three Phase AC Controller under Induction Motor Load

 A.I. Alolah, R.M. Hamouda and A. Eltamely

Saudi Arabia

PMM2-5

258

Improved Rotor Flux Linkage Oriented Control of an Induction Motor with Included Magnetic Saturation

D. Dolinar, G. Stumberger, P. Ljusev

Slovenia

PMM2-6

322

High Performance Field Oriented Rotor Control of Induction Generators

V. Cecconi, V. Di Dio, A. O. Di Tommaso, D. La Cascia, R. Miceli

Italy

PMM2-7

357

Induction Motor Control using Variable Structure Approach

 Amar Golea, Abdelhakim Saiad, Noureddine Golea, Naziha Benounnas

Algeria

PMM2-8

438

Computer investigation of the dynamic behaviour of an asynchronous motor using fuzzy logic for immediate torque control

Z. Koutsogiannis,  G. Adamidis, A. Fyntanakis,

Greece

PMM2-9

447

Microscopic Investigation of Energy Conversion in a Squirrel-Cage Induction Motor Drive under Field-Oriented Control

M. Krishnamurthy and B. Fahim

USA

PMM2-10

449

In Wind-Unwind Application the Comparative Realization of Tension Control with Induction Motors Which are Run by Different Controlled Techniques

N. Bekiroglu and E. Aycicek

Turkey

PMM2-11

423

Optimal speed trajectory tracking of an AC motor drive system with simultaneous  fuzzy logic minimization of its electromechanical losses

Eleftheria S. Sergaki, George S. Stavrakakis,

Greece

PMM2-12

465

Adaptive Fuzzy Control of Reversible Rectifier Feeding Induction Motor with Improved Power Factor

M.T. Benchouia , M.E.H. Benbouzid, A. Golea, S.E. Zouzou and A. Ghamri

Algeria

PMM2-13

485

Development of a Wavelet theory-based Field-Oriented Control method for small power Electrical Machines

E. Mitronikas

Greece

PMM2-14

488

Robust Parameter Estimation Procedures for Vector Controlled Induction Machine Drives

Carlos H. S. De Vasconcelos, Zelia M. Assis Peixoto

Brazil

PMM2-15

489

Robust Flux Weakening Operation of Induction Motor Drives Based on Stator Flux Vector Control

D.Casadei, G. Serra, A. Tani, L.Zarri

Italy

PMM2-16

496

Inverter Nonlinearities Compensation in a Double Fed Induction Motor Drive close to Synchronous Speed

 M.S. Carmeli, F. Castelli Dezza, R. Perini

Italy

PMM2-17

539

Design of a Robust voltage controller for an induction generator in an autonomous power system

Alon Kuperman,  Vitaly Spitsa, Raul Rabinovici, Ezra Zeev, George Weiss

Israel

PMM2-18

554

Design of Transient Excitation Sequences for Sensorless Control of AC Machines

Th.M. Wolbank, J.L. Machl

Austria

PMM2-19

588

Vectored Direct Torque Control for Induction Motor under Losses Minimization

Hmidet Ali, Bacha Faouzi, Dhifaoui Rachid

Tunisia

PMM2-20

594

Transient states of polymerizer drive including real load of specially designed induction motor

 A. Rusek, A. Popenda

Poland

PMM2-21

662

Modified Field Oriented Control of Induction Machine

Samir Moulahoum,  Omar Touhami

Algeria

PMM2-22

736

PWM Waveform impact on Induction Motor Drive Efficiency

Z. Papazacharopoulos, I. Xydis, I. Tsakirakis

Greece

PMM2-23

803

Power factor monitoring of induction machines by using rotor flux oriented vector control

D. Raptis, A. Kladas and J. Tegopoulos

Greece

No

Ref

Paper title

Authors

Country of the

corresponding author

PMM3-1

362

Tooth Concentrated Fractional Windings for Low Speed Three Phase a.c. Machines

M. Cistelecan, B. Cosan, M. Popescu

Romania

PMM3-2

385

The Implementation of Computational Fluid Dynamics and Electromagnetic Finite Element Methods as Standard Design Tools for Large Synchronous Generators

B. Streibl, E. Schlemmer, J. Schönauer and F. Ramsauer

Austria

PMM3-3

386

Design of Plastic Bounded Iron Powder Core Motors

A. Reinap, M. Alaküla

Sweden

PMM3-4

464

Optimum designed induction motors with die-cast aluminum and copper cages –  a comparative study

W. Jazdzynski

Poland

PMM3-5

555

A Rational Way Combining Analytical and Numerical Models with Deterministic Global Optimization Algorithms for the Design of Electrical Machines

J. Fontchastagner, F. Messine, Y. Lefevre

France

PMM3-6

726

Preliminary Design and FEM Analysis of a Rotary-Linear Brushless Machine

P. Bolognesi, L. Taponecco

Italy

PMM3-7

716

On the optimal choice of the end ring resistance for one slot per pole per phase single phase induction motors

M. Poloujadoff

France

PMM3-8

134

Hegel’s Dialectical Method as a Means for Activating the Students’ Thinking during Delivering the Lectures on the Transients in Induction Motors

G. Rogozin

Ukraine

PMM3-9

192

Real Time Phasor Diagram of Synchronous Machine as an Educational Tool

D. Makuc, M. Berlec, K. Lenasi

Slovenia

PMM3-10

204

Development of Wind Turbines Prototyping Software Under Matlab/Simulink®Through Undergraduate Student Projects

M.E.H. Benbouzid, D. Diallo, Y. Amirat, H. Mangel and A. Mamoune

France

PMM3-11

333

Development and implementation of an automated computer aided laboratory exercise integrated in electrical drives courses

I. Tsoumas, A. Safacas

Greece

PMM3-12

450

Free Fall Attraction as a Practical and Theoretical Project in Electrical Engineering Education

 F. Carlsson, J. Soulard, H. Grop

Sweden

PMM3-13

514

Teaching numeric modeling and design of electrical devices

A.Reinap

Estonia

PMM3-14

692

Education modernization of Electric Power Engineering Education at Budapest University of Technology and Economics

I. Vajda, S. Halasz

Hungary

PMM3-15

661

Animation Model bank for Electrical Machinery Teaching

Luo Yingli, Chen Xiqiang, Zhang Jianhua, Wang Jing, Wang Hao,
Niu Yinsuo, Ma Bo, Liu Xiaofang, Zhang Deqin